Sonntag, 27. September 2015

Silos

Walthers' Medusa Cement kit could be a good base for Valkenveld (Walthers Cornerstone No. 3019; 22.5x17.5x27.5cm)

Plan is to cover the left-hand end of my small Inglenook-style layout with a silo complex. I like big industrial buildings that dwarf the trains. I will use the Medusa Cement kit from Walthers as base.

As my layout is situated in the Netherlands of the early 60's, I was looking for actual prototypes. And found one not far off my current home-town. Silo 61 is a complex in Maarssen. The number refers to the building date which fits perfectly to my layout timeframe.



"Silo 61" for the storage of grain in Maarssen. Source: DeFabrique






Donnerstag, 17. September 2015

Arrival of NS 2437

DHL delivered my new NS 2437 from Roco.









On 6 September 2015 I had the opportunity to photograph a 2400 in action at VSM's Terug naar toen event.
More about the prototype here. Information on Nico Spilt's site here.

Aantal 130
Nummering 2401-2530
Fabrikant Alsthom
In dienst 1954
Uit dienst 1991
Asindeling Bo'Bo'
Spoorwijdte 1435 mm
Massa 60 ton
Aslast 15 ton
Lengte over buffers 12,5 m (2530: 13,3 m)
Breedte 2,9 m
Hoogte 3,8 m
Maximumsnelheid 80 km/h
Aandrijving dieselelektrisch
Vermogen 620 kW
Tractiemotoren 4
Motorfabrikant Société Alsacienne de Constructions Mécanique
Inhoud brandstoftank 3100 l
Treinbeïnvloeding geen
Remsysteem directe rem, Westinghouse eenleidingrem

Freitag, 11. September 2015

Ordered: NS 2437 from Roco (Art. No. 62790)




I ordered Roco's model of NS class 2400, numbered 2437, today. An interesting article on the model can be found here.

Inspiration: Deventer Industriespoor

A description of the remains of the freight lines in Deventer which could be an interesting inspiration for Valkenveld. See here.

Donnerstag, 10. September 2015

Ballasting completed

I finished ballasting yesterday. With the glue dried overnight, I want to do the final clean-up work today and finish it off with a drop of ATF oil. Check all tracks and remove ballast on unwanted spots. Finally, to ride a train again. And then, do some weathering on the rails and roadbed.

I had spread the work over many days, by doing small sections at a time and in-between other, non-railroading activities. The proces steps have been as follows:

1. Brush-paint the rail profiles with Humbrol Enamel No. 113. Clean the top of rails with a track cleaning gum.

2. Distributing the ballast, a mixture of Woodland Scenics products: 2x Fine Buff Beige, 1 x Fine Light Grey and 1 x Fine Grey to reflect a roadbed of the Netherlands in the early 1960s.

3. Using a brush, toothstick and fingers to ensure the ballast comes up to the ties but not on top of them. Also, keep the profiles free of ballast and be cautious with the switches.

4. Lightly spray water with a few drops of detergents over the tracks to wet the ballast. Be careful to not move too many "stones"

5. Fixing the ballast with the traditional mixture of 50% glue, 50% water and a few drops of detergent.

6. Removing ballast from unwanted spots using a fine brush and toothstick

7. Clean the top of the rails with a track cleaning gum. Check that rolling stock is moving freely and remove any stones in the wrong places.

8. Apply a tiny fraction of ATF oil and distribute by running a train over the tracks.



Testing the ballasted track




Applying ATF oil.